
10-01-2010, 09:36 AM
|
| CrackBerry Newbie Device(s): 9700 (Bold) Carrier: AT&T/Cingular | | Join Date: Mar 2010 Posts: 6 Likes Received: 0
Thanked 0 Times in 0 Posts
| |
No problems here w/ AT&T, Touch, & 9700...just have to get the right sequence down when setting it up.
First, forget either device. Forget BB on Touch, forget Touch on BB. Then turn off Bluetooth on the Touch (critical step!). Open PDANet on BB. Then back to the Touch. Go into iBluever. Turn on bluetooth from inside iBluever. Select BB (or search if not popping up, then select BB). Enter your GPRS settings (do a Google for "Share your iBluever settings", post count isn't high enough to directly link). Click Done. Then tap on the Device & your BB should then prompt to create a BT passcode. Enter it. Enter it on Touch. Everything should connect. If you keep getting the Settings screen, it means the GPRS settings weren't correct. Once you successfully connect, it'll remember your settings for one click connect.
Using AT&T & BB9700, the following settings worked for me:
APN: wap.cingular
Dial: *99#
User: isp @ cingulargprs . com (no spaces)
Pass: cingular1
Script: Default
Good luck!
|