[panjwani]

can sumone pls specify the improvements after this latest update.thnx

[serahjessa]

Just got the 10.0.10.82 Stl-100-1 on Globe Philippines. Used an unlocked z10 from south Africa.

Posted via CB10

[Blackline5007]

Well I got the update when it was released last week and upgraded to .82

Now after reading the forums about getting further updates to get my STL to change from 100-1to 100-2 by getting a foreign sim card. Well I actually own a active sim card from Vodafone in Ireland.

So I tried and poped the sim card in my phone, went to setting and hit the software update update and it stated I have the latest software installed.

So I took a step further and went to the Web and did the software Web update route and it prompted me that there is a new software available for my phone.

So I accepted the upgrade file and allowed the download to start, once the download completed it requested for me to allow the the ios to install.

As one would do, I accepted and left it to do its thing, keep in mind my mistake here was this was all done on a MAC!

So after about 10 min I noticed my Z10 just flashing its red light and on the screen I had an error message " the file update could not be loaded, as the phone disconnected during the upgrade"

Meaning: My Z10 is now officially Bricked also known as Locked.

No matter what I did, it would turn on, and the red light just kept flashing.

So what do I do? I need my Z10 back working LOL luckily I love challenges :-)

So I searched the net looking for a way to get the Z10 back into safe mode so I can restore it back to factory settings :-)

Yes! You can just like an i-phone you can do that.

All you need is a windows operating system not a MAC

BlackBerry link pc suite

The cable provided

I will save you all time and effort in looking for the steps on how to do it, simply click on the following link:

http://btsc.webapps.blackberry.com/b...ListHelperImpl

Hope this helps :-)


Posted via CB10

[Blackline5007]

Now, the question that still runs in my mind. The mistake I did was upgrade using a MAC, I wonder I try the same process using Windows? Will it be successful?

But the whole point of all this that I am trying to understand is this, what will I gain from the upgrade really? I mean I still have no clue what STL - 100 - 1 and STL - 100 - 2 will give me and is it really in a software patch update?



Posted via CB10

[serahjessa]

The difference between the two is in the order of hardware not software. Stl 1 only gets 3g whilst Stl 2 gets lte. Also Stl 1 is not running the snapdragon cores but some other cores.

Posted via CB10

[nieedo3]

Got update 4 days ago 10.0.10.82 from ufone pakistan

[mrabitti]

voda italy does ship Z10 but no push yet on release 10.0.10.82 (otherwise known as BB OS Version 10.0.10.648) which is the latest one
by the way, you need that to install whatsapp

[Amit Oberoi]

The difference between the two is in the order of hardware not software. Stl 1 only gets 3g whilst Stl 2 gets lte. Also Stl 1 is not running the snapdragon cores but some other cores.

Posted via CB10

There just might be some truth to it as in my box of stl100-2 there was a small pamphlet of snapdragon whereas one stl100-1 user confirmed there was no snapdragon pamphlet in his box. Can anyone using stl100-1 confirm this.

Posted via CB10

[MiSsY_]

Well I got the update when it was released last week and upgraded to .82

Now after reading the forums about getting further updates to get my STL to change from 100-1to 100-2 by getting a foreign sim card. Well I actually own a active sim card from Vodafone in Ireland.

So I tried and poped the sim card in my phone, went to setting and hit the software update update and it stated I have the latest software installed.

So I took a step further and went to the Web and did the software Web update route and it prompted me that there is a new software available for my phone.

So I accepted the upgrade file and allowed the download to start, once the download completed it requested for me to allow the the ios to install.

As one would do, I accepted and left it to do its thing, keep in mind my mistake here was this was all done on a MAC!

So after about 10 min I noticed my Z10 just flashing its red light and on the screen I had an error message " the file update could not be loaded, as the phone disconnected during the upgrade"

Meaning: My Z10 is now officially Bricked also known as Locked.

No matter what I did, it would turn on, and the red light just kept flashing.

So what do I do? I need my Z10 back working LOL luckily I love challenges :-)

So I searched the net looking for a way to get the Z10 back into safe mode so I can restore it back to factory settings :-)

Yes! You can just like an i-phone you can do that.

All you need is a windows operating system not a MAC

BlackBerry link pc suite

The cable provided

I will save you all time and effort in looking for the steps on how to do it, simply click on the following link:

http://btsc.webapps.blackberry.com/b...ListHelperImpl

Hope this helps :-)


Posted via CB10

Could you point me in the direction of where you found the information on changing from STL100-1 to STL100-2?
I have an STL100-1 device and I've been told that it's not possible.
My carrier has already pushed the software update
Software Release: 10.0.10.82
OS Version: 10.0.10.648


Posted via CB10

[bbrog]

Could you point me in the direction of where you found the information on changing from STL100-1 to STL100-2?
I have an STL100-1 device and I've been told that it's not possible.
My carrier has already pushed the software update
Software Release: 10.0.10.82
OS Version: 10.0.10.648




Posted via CB10

You cannot change between STL100-1 and STL100-2. They are physically different models.
As far as I know you are running the latest version of the software for your device type. *.90 is for STL100-2 and *.85 for
STL100-3

Posted via CB10

[MiSsY_]

You cannot change between STL100-1 and STL100-2. They are physically different models.
As far as I know you are running the latest version of the software for your device type. *.90 is for STL100-2 and *.85 for
STL100-3

Posted via CB10

Well ya, if you read the post I quoted, you'll see why I asked that.
There seems to be a bit of debate over weather you will be able to have LTE functionality on STL100-1 devices

Posted via CB10

[hvd23]

hi guys dont worry abt updates anymore...i hav tried n tested a very simple way...u wont need a international sim for tis....
i upgraded from OS version 10.0.9.348 to 10.0.10.690. u can try tis for stl 100-01 o stl 100-3 [worked for stl 100-2]
all u hav to do is follow these simple steps
1] connect ur phone with ur pc via a usb cable
2]open bb link n take a backup
3]now uninstall bb link n install it again n select language English UK n country UK [for stl 100-2]
4]now connect ur phone with ur pc via usb cable
5] now in bb link select ur pc n click on settings icon n select reload device software
6] bb link now vl search for updates for ur phone n u vl receive the lastest OS available for the country u hav selected earlier
7] if u get any download error thn try it on another pc-tis worked for me
8] now wait n let the download finish according to ur download speed n bb link vl load the latest os for U on ur device...
tis takes 6-8 hours in india to download n update ur z10's OS...good luck n cheers. Jai hind

[mrabitti]

Available now on Voda Italy


Posted via CB10

[Sator]

There is a leaked 10.0.10.82/OS 648 for stl 100-1/Dev alpha.

Link: http://www.blackberryos.com/content/...ev-alpha-5479/

Sent from my BlackBerry 9900 using Tapatalk

[serahjessa]

There is a leaked 10.0.10.82/OS 648 for stl 100-1/Dev alpha.

Link: http://www.blackberryos.com/content/...ev-alpha-5479/

Sent from my BlackBerry 9900 using Tapatalk

I could've used this leak 10 days ago lol. But is it still a leak given that a lot of z10 users on Stl 1 already have the update? (India Philippines australia)


Posted via CB10 STL-100-1 Globe PH

[raam4u]

I got the first update as soon as i bought it.
My carrier has already pushed the software update
Software Release: 10.0.10.82
OS Version: 10.0.10.648

[Sator]

I could've used this leak 10 days ago lol. But is it still a leak given that a lot of z10 users on Stl 1 already have the update? (India Philippines australia)


Posted via CB10 STL-100-1 Globe PH

That's good....but not all of stl -1 users are on .82 already.

Sent from my BlackBerry 9900 using Tapatalk

[tariqyaqoob]

yes .... i have downloaded yesterday latest version. 10.0.10.82....in pakistan nd my carrer is Mobilink....

[mrabitti]

Berry travel now available on St100-2 Vodafone italy

Posted via CB10

[AgOess CrysNa]

Ya man... in stl 100-2 they got a different software man