1. suhel28's Avatar
    Hey,

    Long story short if you don't want to read the thing below : Try fully draining your battery and then recharging it after some time.

    I recently made a post where I shared my problem of how my battery indicator goes from 100 to 0% within no time while the phone being still usable.

    I had the problem for some good odd days and I was pretty used to it. But as there is no battery indicator it was hard to know when the phone will switch off so I kept on voluntarily charging it every now and then.

    But this one day I didn't and my battery got fully drained and my phone switched off. After recharging the phone it started to work normally. So I guess the issue was solved once the battery was fully drained, the device had a chance to somehow recalibrate the indicator thing.

    Hope this helps.

    Z10STL100-1/10.2.1.3247
    FF22 likes this.
    08-01-14 08:05 PM
  2. Tino Sibarani's Avatar
    I have do the same thing, but it still not work

    Posted via CB10
    08-01-14 11:41 PM
  3. benny4u_06's Avatar
    No solution works for this battery calibration issue till now. Possibly will have to wait for 10.3 and see how it turns out.!

    Posted via CB10
    08-01-14 11:47 PM
  4. suhel28's Avatar
    Oh that's sad. I hope the 10.3 update somehow works.

    Z10STL100-1/10.2.1.3247
    08-01-14 11:59 PM
  5. brogoh's Avatar
    This also happens to me but I fix it this way and it always fixes the indicator. The solution may not be permanent since my indicator miscalibrates approx once every month or two.
    1. Drain your battery.
    2. Take it out for 45 mins.
    3. Put it back in after 45 mins and charge your phone. Wait for it to turn on.
    4. If the battery indicator shows more than 10%, unplug the phone from the charger immediately. Wait for the indicator to turn to 0% then plug the charger again immediately. Then charge till full. Your indicator's accurate already.
    5. If your indicator shows below 5% after it turns on then just leave it to charge.

    This calibrates my phone well everytime my indicator becomes ****ty. Hope this helps.
    suhel28 likes this.
    08-02-14 06:39 AM
  6. suhel28's Avatar
    This also happens to me but I fix it this way and it always fixes the indicator. The solution may not be permanent since my indicator miscalibrates approx once every month or two.
    1. Drain your battery.
    2. Take it out for 45 mins.
    3. Put it back in after 45 mins and charge your phone. Wait for it to turn on.
    4. If the battery indicator shows more than 10%, unplug the phone from the charger immediately. Wait for the indicator to turn to 0% then plug the charger again immediately. Then charge till full. Your indicator's accurate already.
    5. If your indicator shows below 5% after it turns on then just leave it to charge.

    This calibrates my phone well everytime my indicator becomes ****ty. Hope this helps.
    I skipped the 45mins thing. I just plugged it in and switched on my phone. It showed 0% and took some time to charge though. But I am quite satisfied with the results

    Z10STL100-1/10.2.1.3247
    brogoh likes this.
    08-02-14 09:19 AM

Similar Threads

  1. Blackberry Link Cannot connect to device PROBLEM SOLVED.
    By Zeratul57 in forum Desktop Software
    Replies: 4
    Last Post: 08-22-15, 03:11 PM
  2. Problem with FB app
    By Mahdi rezaee in forum Ask a Question
    Replies: 1
    Last Post: 08-02-14, 08:49 AM
  3. Whatsapp and text message bubbles problem
    By CrackBerry Question in forum Ask a Question
    Replies: 1
    Last Post: 08-01-14, 07:53 PM
  4. Z30 charging problems
    By Thannor in forum BlackBerry Z30
    Replies: 4
    Last Post: 08-01-14, 01:35 PM
  5. BB World problem
    By keanep1 in forum BlackBerry Z10
    Replies: 3
    Last Post: 08-01-14, 09:52 AM
LINK TO POST COPIED TO CLIPBOARD