[sanghvidheeraj]

Strange problem don't know if it's hardware or software glitch. My q10s screen flickers a lot after 10.3 update, it starts flickering, loses colors and then goes blank with just keypad backlit on.
Anyone with same issue? What can be the problem?
Also hav the famous double typing issue along with rebooting when put on hard surface with a small jerk.

Thank u

Posted via Q10

[Taigatrommel]

Since you are using a leak I recommend going back to the latest official software and see if that problem stays.

What kind of double-typing are suffering from? Just occasional random letters double-typed or is it a single (or multiple) keys which are hypersensitive? If it is the latter, you either need to claim warranty or replace the keyboard yourself. The other variant might be, fingers crossed, also related to your leaked software.

The reboot problem is mostly caused by a wobbly battery. IMO the best solution is get to a hobby or craft store and buy a thin piece of rubber foam. Place it inside your battery cover (or on top of the battery) with double-sided tape - this will keep the battery in place

Hopefully not double-typed with my Q10

[sanghvidheeraj]

Double typing is random with any letter, no keys are hypersensitive as yet. All have same feedback when pressed.
I loaded 1052 first it ran fine for few days then it alll started. Then upgraded 1154 via sachesi. It's still same. maybe I should claim warranty only as phone is just 5months old.
I will try reloading software fresh destructive mode n see what happens

Posted via Q10

[yhamaie]

Double typing is random with any letter, no keys are hypersensitive as yet. All have same feedback when pressed.
I loaded 1052 first it ran fine for few days then it alll started. Then upgraded 1154 via sachesi. It's still same. maybe I should claim warranty only as phone is just 5months old.

May I ask if you have run diagnoses (BlackBerry Virtual Expert) on your device?

Posted via CB10

[sanghvidheeraj]

Yes. It passes everything for display tests.
Can proximity sensor be the cullprit?

Posted via Q10

[Joshu42]

Sorry if already asked, but did you drop your phone or open it to change parts ? Did the flicker happen when you shake your phone ?

[sanghvidheeraj]

Ya phone has dropped twice! Never opened phone. But it was working ok after the fall its just recently problem has cropped

Posted via Q10

[john_v]

Yesterday I noticed a similar behavior, but it was only in one specfic app. (also using a q10 with the 10.3 leak). Mine would flicker, show scattered blue streaks, and turn on and off. Exit the app and it stopped. Did a reboot and it stopped doing it.

So maybe related to the leak, possibly?

Posted via CB10

[anischab]

May be the stripes of the screen are losen coz of chocs...
When you watch this, you'll understand... may be you don't need a screen replacement, but only to insert the stripes/connectors firmly again!


BlackBerry*Q10, T-Mobile Germany - SQN100-3, Running OS 10.2.1.2941

[Cranky]

I'd buy a new keyboard. Then when reassembling, you'll be able to reseat all of the connections.

Posted by a Proud NRA Supporter!

[Joshu42]

May be the stripes of the screen are losen coz of chocs...
When you watch this, you'll understand... may be you don't need a screen replacement, but only to insert the stripes/connectors firmly again!

exactly what I thought !

[sanghvidheeraj]

I will show it to service centre n see what they have to say about it.

Posted via Q10

[anischab]

Keep us informed, please!

BlackBerry*Q10, T-Mobile Germany - SQN100-3, Running OS 10.2.1.2941

[sanghvidheeraj]

Update - it dint happen today at all!! That's very strange.. but good
Edit - also have switched off flip to standby. (don't think that's the problem though)


Posted via Q10