[deezy87]

does the radio work for q10 sqn100-1?

Thanks.

all q10 radios are interchangeable

[CyberMan2013]

Is anyone else intrigued and curious about why there are so many app bars with lower version numbers in 10.2.1.2674 compared to 10.2.1.2234? Post #4 in this thread suggests that it's actually a few weeks older than 10.2.1.2234: http://forums.crackberry.com/bb10-le...2674-a-921666/

[CyberMan2013]

Managed to free up some time.

What you'll need to do is grab the appropriate link(s) from here

* Operating Systems *
OMAP Devices (STL 100-1)
Debrick OS: http://cdn.fs.sl.blackberry.com/fs/q...-v7+signed.bar
Core OS : http://cdn.fs.sl.blackberry.com/fs/q...-v7+signed.bar

Qualcomm Devices (Everyone else)
Debrick OS: ONLY GRAB THIS IF YOU KNOW WHAT YOU'RE DOING!

http://cdn.fs.sl.blackberry.com/fs/q...-v7+signed.bar

Core OS : http://cdn.fs.sl.blackberry.com/fs/q...-v7+signed.bar


* Radios *

Z10 (-1): http://cdn.fs.sl.blackberry.com/fs/q...-v7+signed.bar

Z10 (-2/3/4) and Z5 (Porsche): http://cdn.fs.sl.blackberry.com/fs/q...-v7+signed.bar

Z30: http://cdn.fs.sl.blackberry.com/fs/q...-v7+signed.bar

Q10: http://cdn.fs.sl.blackberry.com/fs/q...-v7+signed.bar

Z3 (Jakarta): http://cdn.fs.sl.blackberry.com/fs/q...-v7+signed.bar


The CORE OS and your appropriate RADIO FILE

Open up Sachesi, drag the CORE OS file to install, it will reboot upon completion [IIRC].

Afterwards, just load the radio from the link, and you're good to go, nothing gets wiped.

Bolded parts for gallopiton to use with his/her Z30

What about the App bars?

[thurask]

Autoloaders:

Q10 http://l.bitcasa.com/0Civb1lA
STL100-1 http://l.bitcasa.com/mUQpqWqG
STL100-2/3 http://l.bitcasa.com/EgcmWTbW
STL100-4 http://l.bitcasa.com/r_ODvC1o
Z30 http://l.bitcasa.com/9r9RXuEW
Z3/Kopi/Cafe http://l.bitcasa.com/F1Xhcylp

[Crabamer]

What about the App bars?

I believe the apps are included in the debrick file.

[CyberMan2013]

I believe the apps are included in the debrick file.

I know that but deezy87 was assisting gallopiton who needed clear instructions and the link that deezy87 provided was for the Core OS ONLY (Upgrade version not Debrick) so I asked the question in the hope that deezy87 would notice and verify where gallopiton would be getting his app bars from.

[rajbir01]

Does the Q10 radio work for the Q5?

[CyberMan2013]

Does the Q10 radio work for the Q5?

Yes

Posted via CB10

[deezy87]

I know that but deezy87 was assisting gallopiton who needed clear instructions and the link that deezy87 provided was for the Core OS ONLY (Upgrade version not Debrick) so I asked the question in the hope that deezy87 would notice and verify where gallopiton would be getting his app bars from.

IIRC, the apps are within the core OS

[Foppa_21]

Autoloaders:

Q10http://l.bitcasa.com/0Civb1lA
STL100-1http://l.bitcasa.com/mUQpqWqG
STL100-2/3http://l.bitcasa.com/EgcmWTbW
STL100-4http://l.bitcasa.com/r_ODvC1o
Z30http://l.bitcasa.com/9r9RXuEW
Z3/Kopi/Cafehttp://l.bitcasa.com/F1Xhcylp

"The man" appears. And with an STL100-4 radio!

Now to decide if this is a newer build than the 2156 (2228) I currently prefer. Oh, who am I kidding? I'll probably install it regardless.


Posted from my Z10 via CB10

[CyberMan2013]

IIRC, the apps are within the core OS

Feel free to correct me if I'm wrong but as far as I know the apps are only contained within the Debrick OS. That contains the Core OS + apps. The file you linked to is the Upgrade OS which does not contain the app bars and needs to be added to the same folder containing the apps and correct radio file in order to do an upgrade install with Sachesi. If you download an upgrade OS using Sachesi you will see the Core OS file, the radio file and the app bar files in the output folder. The user you are trying to help still needs to get the app bar files using Sachesi. He can try 310/120/Q10-SQN100-2/Upgrade/Production and then download the Q10 files which would contain the same 295MB Core OS file which you suggested he download (but he really doesn't need to download it again) and he can just take out the Q10 radio file - which is the 23MB com.qnx.qcfm.radio.qc8960.wtr aka qc8960.-10.2.1.2759-nto+armle-v7+signed.bar file. Then replace it with the Z30 radio file - which is qc8960.wtr5-10.2.1.2759-nto+armle-v7+signed.bar. Then with his device connected to his computer, click Install in Sachesi then either drag and drop the folder containing the Q10 10.2.1.2764 Upgrade OS + Apps + Z30 Radio into the install Window or click Folder then choose the same folder.

Posted via CB10

[butterbean1983]

Camera app seems a lot better to me. Also didn't have the "reply now" feature on the call screen before, so that's cool. Facebook app has new features, too. Display seems more vivid, but I could be imagining that.

[melander]

I'm a sprint user who got tired of waiting to get to 10.2, so I used sachesi this weekend to install a 10.2.1 leak. Then Sprint comes out with the official update...

Some Sprint users who installed leaks may wonder if they should update as I did. I can offer this:

Well, I noticed my memory usage went up on the leak to 1.1GB and about 800 free.
With the official update, my memory usage is back to 780MB and 1.1GB free.

[deezy87]

Feel free to correct me if I'm wrong but as far as I know the apps are only contained within the Debrick OS. That contains the Core OS + apps. The file you linked to is the Upgrade OS which does not contain the app bars and needs to be added to the same folder containing the apps and correct radio file in order to do an upgrade install with Sachesi. If you download an upgrade OS using Sachesi you will see the Core OS file, the radio file and the app bar files in the output folder. The user you are trying to help still needs to get the app bar files using Sachesi. He can try 310/120/Q10-SQN100-2/Upgrade/Production and then download the Q10 files which would contain the same 295MB Core OS file which you suggested he download but he really doesn't need to download it again and he can just take out the Q10 radio file - which is the 23MB com.qnx.qcfm.radio.qc8960.wtr aka qc8960.-10.2.1.2759-nto+armle-v7+signed.bar file. Then replace it with the Z30 radio file - which is qc8960.wtr5-10.2.1.2759-nto+armle-v7+signed.bar. Then with his device connected to his computer, click Install in Sachesi then either drag and drop the folder containing the Q10 10.2.1.2764 Upgrade OS + Apps + Z30 Radio into the install Window or click Folder then choose the same folder.

Posted via CB10

I believe you're right, my friend....been a long day, my bad

[Nitish Kumar]

What is the difference between Core OS and Debrick OS ??

[CeCoQ]

As opposed to 10.2.1.2947, this OS comes with Radio for ALL devices including the STL100-1 and even the new Jakarta model STJ100-1. The Radio version is 2759, which is a higher radio version than the one provided by DarcyTallGuy on the hybrid 2947 (It was 2235 radio).

Software Release Version: 10.2.1.2674

NOTE: I am providing Autoloaders files here, so if you load them, it will WIPE your device. If you know how to use sachesi, you can probably grab the files, and do a non-destructive upgrade.

Links: (If a link isn't present, then it means I am still uploading, I will post the link as soon as it is available.)

Z10 (STL100-1) Autoloader: https://mega.co.nz/#!Pc5hRCSB!Y2o0el...AEn5lHFW86FdeI

Z10 (STL100-2-3-4) Autoloader: https://mega.co.nz/#!fARXlajR!yjURG5...Sfpu000RSgrjSU

Q10/Q5 Autoloader: https://mega.co.nz/#!eJgSWKAZ!FEdeel...wqu6v9vjzZ8qB8

Z30 Autoloader: https://mega.co.nz/#!qIAllb7K!72PYKZ...P1D11l5hPZ--t0

Z3 Autoloader: https://mega.co.nz/#!jRZCVSaB!9Br1cB...jHf3mIoIxrH2qA

Thanks! Enjoy

[rykenryken]

Any help to find via sachesi?

Posted via CB10

[tahabashir1991]

thanks downloading

As opposed to 10.2.1.2947, this OS comes with Radio for ALL devices including the STL100-1 and even the new Jakarta model STJ100-1. The Radio version is 2759, which is a higher radio version than the one provided by DarcyTallGuy on the hybrid 2947 (It was 2235 radio).

Software Release Version: 10.2.1.2674

NOTE: I am providing Autoloaders files here, so if you load them, it will WIPE your device. If you know how to use sachesi, you can probably grab the files, and do a non-destructive upgrade.

Links: (If a link isn't present, then it means I am still uploading, I will post the link as soon as it is available.)

Z10 (STL100-1) Autoloader: https://mega.co.nz/#!Pc5hRCSB!Y2o0el...AEn5lHFW86FdeI

Z10 (STL100-2-3-4) Autoloader: https://mega.co.nz/#!fARXlajR!yjURG5...Sfpu000RSgrjSU

Q10/Q5 Autoloader:

Z30 Autoloader:

Z3 Autoloader:

Thanks! Enjoy

[zocster]

As opposed to 10.2.1.2947, this OS comes with Radio for ALL devices including the STL100-1 and even the new Jakarta model STJ100-1. The Radio version is 2759, which is a higher radio version than the one provided by DarcyTallGuy on the hybrid 2947 (It was 2235 radio).

Software Release Version: 10.2.1.2674

NOTE: I am providing Autoloaders files here, so if you load them, it will WIPE your device. If you know how to use sachesi, you can probably grab the files, and do a non-destructive upgrade.

Links: (If a link isn't present, then it means I am still uploading, I will post the link as soon as it is available.)

Z10 (STL100-1) Autoloader: https://mega.co.nz/#!Pc5hRCSB!Y2o0el...AEn5lHFW86FdeI

Z10 (STL100-2-3-4) Autoloader: https://mega.co.nz/#!fARXlajR!yjURG5...Sfpu000RSgrjSU

Q10/Q5 Autoloader:

Z30 Autoloader:

Z3 Autoloader:

Thanks! Enjoy

Merged with an existing thread...

[tahabashir1991]

thanks

Merged with an existing thread...

[Gearheadaddy]

Is anyone else intrigued and curious about why there are so many app bars with lower version numbers in 10.2.1.2674 compared to 10.2.1.2234? Post #4 in this thread suggests that it's actually a few weeks older than 10.2.1.2234: http://forums.crackberry.com/bb10-le...2674-a-921666/

I had Sprint, for years...Their numbers being older does NOT surprise me...sorry to say...on Verizon for the last year...much happier...broke pouch after 10 months, got a new one no hassle (Verizon) ... had broken similar pouch after 32 days with Sprint, "aww sorry man warranty is 30 days." Had to buy a new one. Other stuff too...not just that.
Sorry, just venting...

Trusted Member Genius

[Gearheadaddy]

Feel free to correct me if I'm wrong but as far as I know the apps are only contained within the Debrick OS. That contains the Core OS + apps. The file you linked to is the Upgrade OS which does not contain the app bars and needs to be added to the same folder containing the apps and correct radio file in order to do an upgrade install with Sachesi. If you download an upgrade OS using Sachesi you will see the Core OS file, the radio file and the app bar files in the output folder. The user you are trying to help still needs to get the app bar files using Sachesi. He can try 310/120/Q10-SQN100-2/Upgrade/Production and then download the Q10 files which would contain the same 295MB Core OS file which you suggested he download but he really doesn't need to download it again and he can just take out the Q10 radio file - which is the 23MB com.qnx.qcfm.radio.qc8960.wtr aka qc8960.-10.2.1.2759-nto+armle-v7+signed.bar file. Then replace it with the Z30 radio file - which is qc8960.wtr5-10.2.1.2759-nto+armle-v7+signed.bar. Then with his device connected to his computer, click Install in Sachesi then either drag and drop the folder containing the Q10 10.2.1.2764 Upgrade OS + Apps + Z30 Radio into the install Window or click Folder then choose the same folder.

Posted via CB10

Excellent post. I commend you. Very well explained.

Trusted Member Genius

[Thud Hardsmack]

I'm at work, kinda swamped right now, add me on BBM. I'm sure I can walk you through the procedure

This reminds me of an old cartoon with a guy standing in front of his new VCR holding a VHS titled "How To Hook Up Your VCR".

[chrizrun30]

As opposed to 10.2.1.2947, this OS comes with Radio for ALL devices including the STL100-1 and even the new Jakarta model STJ100-1. The Radio version is 2759, which is a higher radio version than the one provided by DarcyTallGuy on the hybrid 2947 (It was 2235 radio).

Software Release Version: 10.2.1.2674

NOTE: I am providing Autoloaders files here, so if you load them, it will WIPE your device. If you know how to use sachesi, you can probably grab the files, and do a non-destructive upgrade.

Links: (If a link isn't present, then it means I am still uploading, I will post the link as soon as it is available.)

Z10 (STL100-1) Autoloader: https://mega.co.nz/#!Pc5hRCSB!Y2o0el...AEn5lHFW86FdeI

Big thanks

[gallopiton]

no need to apologize, thanks indeed for leading the way...

I believe you're right, my friend....been a long day, my bad