1. whatsever's Avatar
    I never had wifi issues but on 10.3 it has problems to swith to another wifi connection and jumps to 3G.

    Another problem is it shuts down wifi after a time and when I take my phone The wifi is not up.

    In both situation I must restart my phone.

    Someone had a solution or old bar file.

    Posted via CB10
    Last edited by whatsever; 08-23-14 at 01:06 AM.
    08-23-14 12:31 AM
  2. anon721037's Avatar
    Try reloading your software, and set up like new if you can don't restore.
    08-23-14 07:41 AM
  3. kbz1960's Avatar
    That alone is reason enough for me to stay put
    08-23-14 08:06 AM
  4. anon721037's Avatar
    That alone is reason enough for me to stay put
    Kbz its a good one trust me,
    kbz1960 likes this.
    08-23-14 08:10 AM
  5. kbz1960's Avatar
    Kbz its a good one trust me,
    Hum. You're trouble, trust you?
    anon721037 likes this.
    08-23-14 08:56 AM
  6. IntricateNL's Avatar
    I have the same problem. Is it possible to load 10.2.1 radio on 10.3?

    Posted via CB10
    08-23-14 09:03 AM
  7. anon721037's Avatar
    I have the same problem. Is it possible to load 10.2.1 radio on 10.3?

    Posted via CB10

    no
    08-23-14 09:27 AM
  8. whatsever's Avatar
    Tried other router,but still the same problem. It's is connecting but wifi doesn't show up like it's blocked by the Phone. If I restarts it seems ok but after 5 minutes or 100 min it's gone again . Never had this problem.
    08-23-14 03:25 PM
  9. anon721037's Avatar
    Try reloading your software,
    08-23-14 03:31 PM
  10. whatsever's Avatar
    I will download it again first and then reload it because I never had problems with my wifi. first have to charge my Phone
    08-23-14 03:36 PM
  11. superduti's Avatar
    I have has the same problem with wifi, what about using the radio from 10.3.0.700? I was using it before and it was no problem with wifi and also great signal strength.

    Posted via CB10
    08-23-14 03:41 PM
  12. Rodney Wilder's Avatar
    Wifi works fine for me

    Posted via CB, secret level Z30
    08-23-14 03:44 PM
  13. anon721037's Avatar
    I have has the same problem with wifi, what about using the radio from 10.3.0.700? I was using it before and it was no problem with wifi and also great signal strength.

    Posted via CB10
    You could try it, i don't know for sure.
    08-23-14 03:44 PM
  14. Supa_Fly1's Avatar
    I will download it again first and then reload it because I never had problems with my wifi. first have to charge my Phone
    Ridiculous!

    Considering you are the only one posting this issue - and one person loosely agreeing/stating they have I'd say it's an understanding issue or your network setup.

    Some questions while you download but before re-installing (which is senseless because nothing was installed and missing the first time will be fixed the second time):

    1. State in full what your router/SSID setup is:
    WPA2 Personal/Corporate?
    Certificate Authentication?
    Internet Connection: Cable/DSL/Satellite
    MAC Filtering enabled?
    Dual-Band 802.11n or split for 2.4Ghz/5Ghz?

    2. Are you sure you entered your WiFi password properly?

    3. Is your Z30 setup to handle the Dual-Band if setup on router, or connecting only to 2.4Ghz?

    4. How many devices are simultaneously connecting - and is your router restricting the number of connections?
    - Connect to your routers admin settings directly to find out.

    5. Are you flipping your Z30 face down on a surface and have enabled that gesture/action to lower battery usage?!!!!
    ^ this is new in 10.3 so pay careful attention on your 3rd post here as it'll directly affect performance.

    It's so bewildering posts like the first and yet lack of information or troubleshooting is done, even at a basic level. Sure you may "know your network" but you've changed the OS on your device which behaves VERY differently and after all is in BETA.

    Last question: Have you tried at least 2 other WiFi networks connectivity over the same period of time?! Starbucks - timed limited connections, and a friends wlan network?
    08-23-14 03:47 PM
  15. superduti's Avatar
    FYI, I have installed the radio 10.3.0.699 and turned the wi-fi on and off a couple of times and it seems to reconnect right away. I also made a few phone calls and the reception is better (I live in a rural area so signal strength has a big effect on things )

    Posted via CB10
    08-23-14 04:10 PM
  16. anon721037's Avatar
    FYI, I have installed the radio 10.3.0.699 and turned the wi-fi on and off a couple of times and it seems to reconnect right away. I also made a few phone calls and the reception is better (I live in a rural area so signal strength has a big effect on things )

    Posted via CB10
    Good to hear,
    08-23-14 04:11 PM
  17. whatsever's Avatar
    Supa_fly1

    1. Yes it working fine and I also tested two other routers ASUS, Linksys and from my network provider. All giving the same problems

    2. Yes because after a reset it work fine for some time but when the Phone sleep it's happening again

    3. I try both and normal is dual so i switch it to 2,4 GHz

    4. I just reset my modem and at the moment there are only 3 but normal there are 6

    5. I kow the gesture of flipping but I don't use it in 10.3

    What i did more is set my network to 2G/3G only and reset, reset and after reset or restart my wifi works again till it stops.

    I just going to install it over again or ?

    Is it possible to install a radio from a older 10.3 version with sanches. without problem? So yes I think to try that first .

    someone has a radio bar file from earlier version like 10.3.0.700.
    Last edited by whatsever; 08-23-14 at 06:44 PM.
    08-23-14 06:32 PM
  18. Supa_Fly1's Avatar
    Supa_fly1

    1. Yes it working fine and I also tested two other routers ASUS, Linksys and from my network provider. All giving the same problems

    2. Yes because after a reset it work fine for some time but when the Phone sleep it's happening again

    3. I try both and normal is dual so i switch it to 2,4 GHz

    4. I just reset my modem and at the moment there are only 3 but normal there are 6

    5. I kow the gesture of flipping but I don't use it in 10.3

    What i did more is set my network to 2G/3G only and reset, reset and after reset or restart my wifi works again till it stops.

    I just going to install it over again or ?

    Is it possible to install a radio from a older 10.3 version with sanches. without problem? So yes I think to try that first someone has a radio bar file from earlier version like 10.3.0.700.
    Check the main LEAK thread of the current version ... curious did you mistakenly install the wrong build ... say a global Z30 autoloader when you have a Verizon model or vs versa - I'm not even sure that would work.

    PS: 2 things:

    You said you checked 3 routers ... I didnt ask that ... I asked did you try other networks - as in completely different SSID's (the routers, in my understanding could've been on the same network and even extended - forgot to ask that btw. Also ... "2. Yes because after a reset it work fine for some time but when the Phone sleep it's happening again" it's sleeping ... no device immediately wakesup and connects immediately to WiFi ... it's got to acquire a new IP address lease, then get a default gateway.

    Come to think of that last part ... try to get your home network's main router (if you do have 3 running but I may have misunderstood) to release for a new DHCP from your provider.

    Sorry I'm just perplexed nobody else has noticed this issue ... I've had a WIFi issue at work yesterday immediately after installing 10.3.0.1059 on my Z30 but my son's HTC One M7 also had the issue ... coming home and overnight not 1 single issue:
    WPA2,
    Username/password authentication
    Dual-Band 802.11b/g on 2.4 Ghz
    Linksys home router ... 12 devices connecting and one ******* always bittorrenting which I hardly have any speed at all but it works .
    08-23-14 06:48 PM
  19. whatsever's Avatar
    I downloaded de NON Verizon version from a mega link. I also chance my network name, reset and also reset my network providers modem but everything work fine but the phone is losing it . I looking now for the radio for the Z30 from 10.3.0.700 or maybe just install it al over again.

    This is the first time since feb 2013 BB OS 10 has problem with wifi and I loaded a lot of leaks on my old z10 and Z30 and never had issues except for those pins.
    08-23-14 07:04 PM
  20. whatsever's Avatar
    I installed the OS again and still the same problems.

    Question : Is it possible to install 10.2.1 autoloader because that is what i Always do but with 10.3 I read some confusing story's that you can
    not roll it back to 10.2.1?
    Last edited by whatsever; 08-24-14 at 03:02 AM.
    08-24-14 02:45 AM
  21. whatsever's Avatar
    SOOOOOOOOOOOOOOOOOOOOOOOOOOOOO I just update the radio and my router.

    Then I get off my sim card from my operator and NOW I can switch wifi ON and OFF so it seems that the combination
    network operator is the bad combination.

    I just get my card back in and YES problem is back.


    Attachment 293165

    You see I'm on 3G but it seems false. Because I'm connected to wifi. So it a bug that doesn't show me that I'm on wifi.

    I also turn of wifi and than my download speed is 6 Mb.

    So everyone with the same problem don't bother just keep your WIFI on only thing it doest show up.
    BBornot2B likes this.
    08-24-14 02:55 PM
  22. BBornot2B's Avatar
    Thanks so much #whatsever I'm having exactly the same issue (you're not the only one) and your research helped a lot. I've tried to connect to the router myself 192.168.1.1 while supposedly not on wifi but 4G, and I reached it so it's true: it's just the indicator that doesn't work properly. I submitted feedback to the beta program. Thanks again. Diego
    08-30-14 10:43 AM
  23. whatsever's Avatar
    Thanks so much #whatsever I'm having exactly the same issue (you're not the only one) and your research helped a lot. I've tried to connect to the router myself 192.168.1.1 while supposedly not on wifi but 4G, and I reached it so it's true: it's just the indicator that doesn't work properly. I submitted feedback to the beta program. Thanks again. Diego
    You in the beta program. I think it's good you tell them and I'm using an ASUS N66U wifi ROUTER.

    I also know 3 other people having the same issues 2 with a Z30 and one with a Z10.

    The one with the Z10 has problems when she set off wifi and she putt it back on it's not working. So she restart the Phone and than it's fine.
    08-30-14 04:42 PM
  24. docfreed's Avatar
    Yes, you can install 10.2.13247 - there's an autoloader referenced here: https://docs.google.com/spreadsheets...#gid=438638507
    Just make sure that you pick the 10.2.1.xxx for your particular Z30 - I have done it many times (I tried 10.3.0.1052 and also the 1130 a couple of times but always ran into some sort of instability. Although they're nice OS's, they need a few tweaks before I can use them as a daily driver).

    QUOTE=whatsever;10753920]I installed the OS again and still the same problems.

    Question : Is it possible to install 10.2.1 autoloader because that is what i Always do but with 10.3 I read some confusing story's that you can
    not roll it back to 10.2.1?[/QUOTE]
    08-30-14 06:10 PM

Similar Threads

  1. 10.3.0.1052 active frames and menu auto-expansion
    By The Me in forum BlackBerry 10 OS
    Replies: 15
    Last Post: 09-12-15, 06:32 AM
  2. ArKick now preloaded with 10.3?
    By MrGabriel in forum BlackBerry 10 OS
    Replies: 6
    Last Post: 08-23-14, 12:40 AM
  3. help with the new 10.3.0.1052 black theme .... ?
    By da_flamer in forum BlackBerry 10 OS
    Replies: 7
    Last Post: 08-22-14, 11:24 PM
  4. 10.3.0.700 os
    By ashisharma90 in forum BlackBerry 10 OS
    Replies: 3
    Last Post: 08-22-14, 11:02 PM
  5. Replies: 1
    Last Post: 08-22-14, 10:08 PM
LINK TO POST COPIED TO CLIPBOARD