[Daniel Irving]

Igrann needs hub++ setup.



Posted via CB10

[JunkieXP]

How can I set Hub++ up to not mute the led on opening the lid (and disabling the sleep magnet)?

Edit: So after releasing the update with Holster Profiles I see some requests of dismiss the LED on UnHolstering. Would you please make this Configurable like Flip and Volume to Dismiss cause my case doesn't have a hole for the LED (which I don't want) and I still want to be able to see what messages are waiting for me in a blink.

Posted from my BlackBerry Passport

[mrjmc99]

Found an interesting bug last night, when using custom notification profiles in 10.3.1 hub++ doesn't turn sound notification back on if you switch from the vibrate profile to a custom profile. App sound notification is enabled for hub++ on the 2 custom profiles.

Z30STA100-3/10.3.1.1154

[moody]

Found an interesting bug last night, when using custom notification profiles in 10.3.1 hub++ doesn't turn sound notification back on if you switch from the vibrate profile to a custom profile. App sound notification is enabled for hub++ on the 2 custom profiles.

Z30STA100-3/10.3.1.1154

I don't think that's necessarily a "bug" in the app. I am pretty sure it's a conflict w/ the OS you're running.

Same one as me, and there are a few glitches that weren't there w/ an official OS.

Z30STA100-3/10.3.1.1154

I am.... Mrs Peevishlicious

[mrjmc99]

I don't think that's necessarily a "bug" in the app. I am pretty sure it's a conflict w/ the OS you're running.

Same one as me, and there are a few glitches that weren't there w/ an official OS.

Z30STA100-3/10.3.1.1154

I am.... Mrs Peevishlicious

You never know, but it's worth pointing out, I'm not sure what logic the developer is using to decide if the app needs to be silent or not. If it's just going based off of expected profile names then that will need to be changed.

Z30STA100-3/10.3.1.1154

[ralfyguy]

Devcellent I found a 6.0.4.1 update in the sandbox and installed it on my 10.2.2 OS Z10. Is that OK or was that only for 10.3?

Posted via CB10

[bermie2000]

I'm having an issue with these latest updated builds of HUB++
Note: I only use HUB++ to control LED (not sounds)
There used to be a setting for picking options in an earlier build for system (or other, I don't remember) notifications (in the hub). I had mine set to a custom LED. I noticed it disappeared a while ago, but figured it might be fixed in a later build, so never mentioned anything. However, I just installed the latest build and it is STILL missing, but whenever I get a system notification in my hub, the old HUB++ setting I had for system notifications goes off. I've looked through everywhere on HUB++ and all accounts and cannot find this anymore--am I missing something somewhere?

[motec bb]

What's this supposed to mean?!?


Posted via CB10

[ralfyguy]

What's this supposed to mean?!?


Posted via CB10

Yeah, and what if I want to upgrade now to 10.3?

Posted via CB10

[MADBRADNYC]

Maybe it means don't install it if you're above that OS?

Or maybe don't upgrade to that OS or higher if you want it to work properly?

Maybe I'm wrong...

Posted via CB10

[adampageuk]

Great... I just clicked update all, because I had a beweather, blend and another app update. Didn't bother to read the upgrade notes... is it totally broken on 10.3.1?

[muellerto]

Some weeks ago I described a problem as follows:

Problem: I use Hub++ for a long time and it did always work well. Now I have the following: I have a system event configured for months, the LED should signal when I'm on wifi. This doesn't work anymore, whatever I do, it's dead - wifi is on but the LED shows nothing. But Hub++ is indeed running, other LED signals are shown when the event occures. Did anyone ever have this issue? I rebooted several times, switched Hub++ off and on, did reconfigure this event, nothing helps.

This is still actual, also with the latest update from yesterday. And I must extend this: my Hub++ has also a signal configured for "No Cellular", red blinking LED. But this doesn't work anymore. So I have already two signals dropped out, "No Cellular" and "WiFi" (this means: "wifi is on"). But once both did work very well. Other signals like "email received" or "charging" do still work. OS is 10.2.1.3442.

Does indeed nobody have something similar?

[olirt]

Adam, I did the same thing and now it's totally screwed. Tried pressing the restore button within the app but that just reset all my custom notifications. I'm so gutted because this was my favourite app (and it cost �2!). If anyone finds a way to download the old version please let me know. Kicking myself as I should have read the upgrade notes!

[moody]

Great... I just clicked update all, because I had a beweather, blend and another app update. Didn't bother to read the upgrade notes... is it totally broken on 10.3.1?

Ditto. idk if it's broken until someone contacts me

[muellerto]

And I must extend this: my Hub++ has also a signal configured for "No Cellular", red blinking LED. But this doesn't work anymore. So I have already two signals dropped out, "No Cellular" and "WiFi" (this means: "wifi is on"). But once both did work very well. Other signals like "email received" or "charging" do still work. OS is 10.2.1.3442.

Does indeed nobody have something similar?

Ha! I made a discovery: my signals seem to work well when I switch to a none user defined LED color pattern. If I use just "Magenta", "Blink Once" and "Slow" it suddenly starts to blink. Indeed I had a customized user pattern, a very slow M---------------------------------, because I find the default "Slow" much too fast. Is there a difference? Do these patterns internally have a maximum length?

[jdesignz]

Thanks for giving away this app!!! Happy holidays!!

PasaportePilipinasSQW100-1/10.3.1.1154

[arosa]

Any chance we will be able to REPLY from within the notification pop-up? I love the app, and am having no issues with it on 10.3.1.1154 on my Verizon Z30 ... but it seems like that is a "natural" feature that is missing -- thanks :-)

[Aqeeb Hussain]

I've just downloaded the app from the festival giveaway just like to say thank you.! But how do I get the LED to work on my what's app, it says....




Posted via CB10

[trinichindian]

I've just downloaded the app from the festival giveaway just like to say thank you.! But how do I get the LED to work on my what's app, it says....




Posted via CB10

Click on the notification in the hub. It will the open hub++.

Select Whatsapp from the drop down list.

Zwiped from my Zed, Awaiting 10.3.1...

[popengchan]

Any idea when would the specific BBM LED contact be applied? I mean a specific color for a specific BBM contact feature?

Posted via CB10

[Aqeeb Hussain]

Click on the notification in the hub. It will the open hub++.

Select Whatsapp from the drop down list.

Zwiped from my Zed, Awaiting 10.3.1...

I can't find this!
Please help!

Posted via CB10

[MADBRADNYC]

I can't find this!
Please help!

Posted via CB10

It is not there until you receive incoming messages. As per the instructions, you need to wait for a notification so you can see it. Then when you see the notification, you tap on it for further options.

HTH

Posted via CB10

[Aqeeb Hussain]

It is not there until you receive incoming messages. As per the instructions, you need to wait for a notification so you can see it. Then when you see the notification, you tap on it for further options.

HTH

Posted via CB10

That?



Posted via CB10

[trinichindian]

That?



Posted via CB10

No.

The actual notification itself, what u posted initially . That s what u click on.

Zwiped from my Zed, Awaiting 10.3.1...

[Aqeeb Hussain]

I'm confused! :s

Posted via CB10