| || |
| | 05-29-13, 04:43 PM Thread Author #1
10.1.0.2354 Autoloader for STL100-2//3/4
There's already an Autoloader for 10.1.0.2354 STL100-1, but I didn't see one for STL100-2/3/4. So here it is.
Thanks to Kris for posting info about this, and shomeet.p for getting that info to him.
This is NOT a leak; 10.1.0.2354 was officially released on some Romanian carrier for STL100-2 (STL100-2 OSes seem to work perfect on STL100-3/4 devices).
In fact, it is recommended that you use a SIM from that carrier, or Sachup/Sachibar to load this OS yourself if you want it (If you use Sachup make sure to check for the STL100-2 and set the mode to Update, not Debrick, if you do not want to have to reload your data). One of the benefits of that is that it is a non-destructive load if you do it that way, which means you probably won't lose your data.
To get it with Sachup, use the carrier and country settings MNC 226 and MCC 010. Sachup/Sachibar is located at Sachup: Firmware Grabber.
I have not tested this autoloader, as I opted to use Sachup. However, there is no reason it shouldn't work fine.
That being said, if you want to load it with an Autoloader, you can download it from Mega at the link below.
Before loading, please check if there is a newer version available: The All Encompassing Beta/Leak OS Thread
As always, it is recommended that you backup with BlackBerry Link. This WILL WIPE YOUR APP AND SETTINGS DATA!
To use: simply download, unzip, and run.
OS version: 10.1.0.2354
CrackBerry and I (and anyone else) are not responsible for anything you do with this file; by downloading it, you are assenting to the fullest release of liability applicable in your jurisdiction and agreeing to hold harmless all persons involved.
1. Download Sachup from Sachup: Firmware Grabber.
2. Change Country to 226
3. Change Variant to STL100-2 (unless you have a STL100-1)
3.5 (optional). Change Mode to Update (if you do not want to wipe your data)
4. Click "Download All"
5. When all files are downloaded, launch Sachibar
6. Enable Development Mode on your BlackBerry
7. On your PC, highlight all downloaded .bars and drop them into Sachibar
8. Let it load.
Is this better than 10.1.0.2342?
It seems to be; users have reported quicker speed. As of this posting, its too early to gauge battery life. Apparently, 2342 failed internal testing (10.1.0.2354 Autoloader for STL100-2//3/4)
Sachup is listing the OS as 10.1.0.2312; is that correct?
Yes, that's the carrier version number. See http://forums.crackberry.com/bb10-le...rsions-812290/
My BlackBerry is stuck on 100% after installing the update?
The first boot takes a long time; if it's been on 100% for more than 10 minutes, do a battery pull.
I don't like Google Drive or Mega, can I download it as a Torrent?
Yes, thanks to Thurask: https://dl.dropboxusercontent.com/u/...68.TPB.torrent
My MMS aren't working, or I'm not getting a 4G icon!
This isn't a bug related to the autoloader. It's an OS caused bug, and can be fixed by backing up, doing a security wipe, and reloading your data.
There's no boot time in About?
This is a known bug in 10.1 OSes.